Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Chock

A metal fitting, open or closed, through which hawsers and lines are passed.

How it works

A chock is a metal fitting that a line passes through. The Cutter Seamanship Manual describes chocks as heavy fittings secured to the deck, through which lines pass out to the bollards on the pier. They come open, closed, roller and double roller. The Boat Crew Seamanship Manual notes that a chock may be open or closed, and that the word also means a block used to hold something in place, as under a boat being repaired.

Several related fittings do similar work. A mooring ring is basically a standard chock built into a bulkhead, and the bow chock is sometimes called a bullnose. A fairleader is not the same: it leads lines around obstructions and keeps them aligned with winches or capstans.

Chocks matter for chafe and for scope. 33 CFR 164.74(b) requires a towline lead that avoids sharp bends from fairlead blocks and chocks, and chafing protection. The scope of an anchor rode is measured from the bow chocks, as the ratio of rode length to the vertical distance from the chocks to the bottom, and the Boat Crew manual says to attach chafing gear where the rode passes through the chocks.

What to know for the exam

  • A direct question asks which of the deck fittings is best defined as a chock.
  • Anchoring questions use the bow chock as the reference when working out scope, so the depth has to be increased by the height of the chocks above the water, and ask where chafing gear goes on the rode.
  • Towing questions apply 33 CFR 164.74(b): the towline lead must avoid sharp bends from fairlead blocks, chocks or tackle, and the line must be protected from chafing where it contacts chocks or rails.
WORKED EXAMPLE

Scope measured from the chock

A boat anchors in 18 feet of water, and the bow chocks are 4 feet above the water. The vertical distance from chock to bottom is 18 + 4 = 22 feet. At a 6:1 scope the rode needed is 6 x 22 = 132 feet.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Cutter Seamanship Manual, Chapter 4, Sec. C.2.c and C.2.dCutter Seamanship Manual (USCG)
  • USCG Boat Crew Seamanship Manual, Appendix A; Chapter 10, Sec. H (scope)
  • 33 CFR Part 164, 164.74(b) (towing terminal gear)33 CFR 164.74 on eCFR

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.