Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Aft

Near or toward the stern.

How it works

Aft means toward the stern, and in the Boat Crew Seamanship Manual moving toward the stern is going aft, while a boat moving backward is going astern. The direction word and the motion word are different. Aft and forward together describe the fore-and-aft line, which runs parallel to the centerline.

On a plan or a draft report it is a position word too. A ship's draft is read at the marks forward and aft, and the difference between them is the trim. When the stern is deeper the ship is down by the stern, and when the bow is deeper she is down by the head.

The same word turns up in construction rules, where bulkheads and fittings are located by reference to the forward and after ends of the hull, as in the aft peak bulkhead requirement in 46 CFR Part 171.

What to know for the exam

  • In the Deck General modules the word appears in trim, stability and hull-construction questions, including a type that gives forward and after drafts and asks you to name the condition using the Army handbook's terms.
  • In piloting questions it is plain direction, as in something being aft of the beam or a light being seen on the quarter.
  • Engineering and regulation questions use it for positions, such as peak bulkheads and compartments in 46 CFR Subchapter S.
WORKED EXAMPLE

Reading trim from drafts

A vessel reads 9 feet 6 inches forward and 11 feet 0 inches aft. The draft aft is deeper by 1 foot 6 inches, so she is down by the stern with 1.5 feet of trim. Reverse the two readings and she would be down by the head.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Boat Crew Seamanship Manual, Chapter 8, Sec. A (Terms)
  • Army FM 55-501, Marine Crewman's Handbook, Chapter 3, Structural Parts of the Hull (trim and list)Marine Crewman's Handbook, FM 55-501

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.