Move over the chartSchematicTraining use only, not for navigationNot for navigation
Practice chart plotting on screen with a virtual parallel ruler and dividers. Draw course lines, measure distance in nautical miles, mark a position from a question, and read true and magnetic courses on the three NOAA training charts used for Coast Guard chart plotting questions: 13205TR Block Island Sound, 12354TR Long Island Sound Eastern Part and 12221TR Chesapeake Bay Entrance. Two simple schematic practice charts are also here for learning the steps. Free for everyone, no account needed. Training use only, not for navigation.
How to plot a course on a chart
1Pick a chartChoose one of the three NOAA training charts (13205TR, 12354TR or 12221TR) to plot on the real chart, or one of the two schematic practice charts, which are simple drawings made only for learning the steps.
2Lay down a course linePlace the parallel ruler on the two charted points, then walk it to the compass rose to read the true course.
3Measure the distanceOpen the dividers across the course line, then step it off against the latitude scale (one minute of latitude is one nautical mile).
4Correct for variation and deviationConvert true to magnetic to compass with the TVMDC method. Add easterly variation going down, west going up, and apply your deviation table.
What you can practice here
Course and distance between two charted positions
True, magnetic and compass course conversions (TVMDC)
Dead reckoning, speed, time and distance
Set and drift, and the course to steer in a current
Yes. The plotter is free for everyone, with no sign-up and no payment. Our exam question banks have free samples and paid access, but the plotting table is open to all.
The three NOAA training charts used for Coast Guard chart plotting questions: 13205TR (Block Island Sound and Approaches), 12354TR (Long Island Sound, Eastern Part) and 12221TR (Chesapeake Bay Entrance). They are US government charts from the NOAA Office of Coast Survey, shown as scanned, with a fix to the printed latitude and longitude scales. The tool also has two schematic practice charts with a simple grid, approximate coastlines and a few lights. The schematic charts are not NOAA charts, so use them only to learn the steps, not to memorize positions.
Chart plotting is part of the six-pack (OUPV), Master under 100 tons, and Master or Mate under 200 tons exams, and the towing vessel exams. Each has its own chart plotting section of 10 questions, and you need 90% to pass.
No. The exam uses printed copies of the NOAA training charts, and you plot on them by hand with parallel rules and dividers. This tool is a practice aid. It shows the same charts on screen, but a click on a screen is not the same as plotting by hand, so keep practicing with the printed chart too.
Use the memory aid TVMDC (True, Variation, Magnetic, Deviation, Compass). Going from True: add westerly variation or subtract easterly variation to get Magnetic, then add westerly deviation or subtract easterly deviation to get Compass. Going from Compass back to True, reverse the signs.
One minute of latitude equals one nautical mile. Always measure distance on the latitude scale at the side of the chart nearest to your course line, never on the longitude scale.