Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Bitter end

The last end of a rope, or the inboard end of an anchor cable that is secured to a bitt.

How it works

The bitter end is simply the end of a line that is worked, or the end you do not use. In the Boat Crew Seamanship Manual it is the running end, the free end of the line. The long unused part is the standing part. The manual then adds the bight, a half loop, and the turn, a single wind around a post or bollard.

On a ship's anchor chain it is the last link. The Navy text says the bitter end of the chain is secured to a pad eye on the bulkhead of the chain locker. The Army definition adds that it is the inboard end of an anchor cable secured to a bitt.

It shows up in wire rope work too. In a temporary eye made with wire rope clips, the U-bolt goes over the bitter end and the saddle sits on the standing part, so the live end is not crushed. Space the clips six wire diameters apart and retighten them after the rope has been under strain.

What to know for the exam

  • Seamanship questions use it for the working end of a line: which part of a wire rope clip goes over the bitter end, what keeps a knot from slipping out when synthetic line is bent to an object, where a heaving line is made fast to a mooring line, and which end to pass when passing alongside lines.
  • The Able Seaman practical demonstration for marlinespike seamanship, code AB02, requires an eye splice with the bitter end whipped, per the NMC Deck and Engineering Guide.

Common questions

Sources

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.