Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Athwartships

Crosswise of a ship, at right angles to the fore-and-aft line.

How it works

Athwartships means across the vessel, from side to side, at a right angle to the fore-and-aft line. Army FM 55-17 puts it as the counterpart of fore and aft. It describes a direction of a line, a bulkhead, a load or a motion, while abeam is a direction taken from the vessel to something outside it.

The regulations use it for structure. An athwartship bulkhead runs from side to side, and 46 CFR 154.330 sets distances for openings from the athwartship bulkhead that faces the cargo area. Tank vessel coamings include forward and aft athwartships coamings under 33 CFR 155.310. In cargo handling, the direction of dunnage and stowage, fore and aft or athwartships, is specified to spread and secure the load.

It is also the word for sideways stability. The Boat Crew Seamanship Manual calls transverse stability athwartships stability, the part that keeps a boat from rolling over, and FM 55-501 calls a vessel out of balance athwartship, leaning to one side, listing. A vessel that is out of balance fore and aft has trim instead.

What to know for the exam

  • Deck General questions on trim and list rely on the distinction: drafts forward and aft tell you the trim, and a lean to one side is the athwartships condition called list.
  • Cargo questions apply it to laying dunnage and aligning loads on a landing craft, and compass questions apply it to how gyro repeater gimbals and equipment are oriented.
  • The source texts use it for loads as well. The Cutter Seamanship Manual says H-bitts take the athwartship loads when a towline sweeps the fantail.

Common questions

Sources

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.