Bitt
A strong post of wood or metal on deck, at the bow or stern, to which anchor, mooring or towing lines may be fastened.
How it works
Bitts are vertical posts, usually in a pair, bolted to the deck. The Cutter Seamanship Manual describes them as vertical cylinders called barrels, with a top plate and sometimes a line guard to keep a line from riding up. The common type is the double-barrel fixed bitt. There is normally a set of bitts forward and aft of each chock.
Other types do other work. Recessed shell bitts are designed for a 3-inch circumference, 3-strand nylon line, T-bitts are used for small boat handling in well decks, and H-bitts, the heavy ones, are placed near the cutter's pivot point so they can take the athwartship load when a towline sweeps the fantail. A sampson post is a vertical timber on the forward deck that serves as a bow cleat or bitt.
The way a line is made up matters as much as the fitting. The Boat Crew Seamanship Manual's method is one complete turn around the near horn, several figure eights around both horns with at least three turns as the standard, and a finishing round turn. It says to avoid half hitches, weather hitches and lock hitches on standard boats.
What to know for the exam
- Deck questions ask how a line is secured to a set of bitts on a standard Coast Guard boat, and test the figure-eight and round-turn sequence.
- Related questions compare fittings: a bollard, a cleat, and a chock, so the definitions of each need to be clear.
- Towing hardware, bitts included, should have backup plates to spread the load, according to the Boat Crew Seamanship Manual.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- USCG Cutter Seamanship Manual, Chapter 4, Sec. C.2 (deck fittings)Cutter Seamanship Manual (USCG)
- USCG Boat Crew Seamanship Manual, Chapter 7, Sec. E.2.c and E.2.d (securing a line to a bitt and a sampson post)
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.