Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Block

A grooved pulley, or sheave, in a frame or shell with a hook, eye or strap by which it can be attached.

How it works

A block is one or more sheaves in a frame with a hook, eye or strap. On its own it only changes the direction of a pull. With a rope led over the sheave and a second block, it becomes a tackle that multiplies the force on the hauling part. FM 55-501 says to find the mechanical advantage of a simple tackle by counting the parts of the moving line at the moveable block, which is the one attached to the load.

Friction takes some of that gain back. The handbook's rule of thumb is to add roughly 10 percent of the load for every sheave in the tackle. The strain on the hauling part is then the load plus friction divided by the mechanical advantage. The same chapter chooses the block size for fiber line by multiplying the circumference of the line by 3 and going to the next larger standard size, with blocks listed from 4 to 14 inches.

Blocks are matched to the line they carry. The handbook warns never to use a block with rope larger than it was designed for, since rope bent over a small sheave is distorted and can wear against the frame. It also says never to paint a wooden block, because a coat of paint could hide a split.

What to know for the exam

  • Calculation questions give a load and ask for the mechanical advantage of a named tackle, the friction allowance for a given number of sheaves, or the pull on the hauling part. Several use the FM 55-501 method of 10 percent per sheave, then total weight divided by mechanical advantage.
  • Some questions show a rigging illustration and ask you to name the tackle or work out its mechanical advantage from the number of parts at the moving block.
  • Other items ask how the Army handbook sizes a block for fiber line, and what the block at the foot of a cargo boom that leads the wire to the winch is called.
WORKED EXAMPLE

Pull on the hauling part

A twofold purchase has four sheaves and a mechanical advantage of 4. To lift an 800 pound load, friction is 10 percent of 800 = 80 pounds per sheave, so 4 x 80 = 320 pounds. Total weight is 800 + 320 = 1,120 pounds. The strain on the hauling part is 1,120 / 4 = 280 pounds. For block size, 3 inch fiber line x 3 = 9 inches, so the next larger standard block, 10 inches, is chosen.

Common questions

Sources

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.