Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Fairlead

A fitting, such as a block, chock or roller, that changes the direction of a line or cable and improves its effectiveness. It usually reduces chafing.

How it works

A fairlead guides a line or cable so it leads fairly, without a sharp bend or a bad angle. The Army handbook glossary calls fairleads the fittings or devices used to preserve the direction of line, chain or wire so it is delivered fairly. Chocks, rollers, blocks and sheaves can all act as fairleads, and the line usually chafes less because the surface it runs on is smooth and rounded.

In towing the fairlead is where a lot of the damage happens. The Army handbook says stern rollers and other fairleads must be lubricated and all points of line wear offered a fairlead, and it says the towline must be checked periodically for a fairlead and chafing. 33 CFR 164.74(b)(3) calls for the lead of the towline to prevent sharp bends from fairlead blocks, chocks or tackle, and (b)(5) for protection from abrasion by chafing gear or lagging.

A fairlead is not a fitting that holds a line, so it is different from a bitt or a cleat. It only controls direction. The Boat Crew manual describes a bow chock as a fitting with jaws that serves as a fairlead for anchor rodes and other lines.

What to know for the exam

  • Towing vessel questions ask what can serve as a fairlead on a tow, and the answer lists several fittings, such as chocks and roller chocks, so read the options as a set.
  • They also ask what happens when bridle legs are of unequal length, which includes chafing on the fairlead or bitts of the tow.
  • Regulation questions ask what 33 CFR 164.74 says about the lead of a towline, which is about avoiding sharp bends from fairleads, chocks or tackle.

Common questions

Sources

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.