Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Amidships

In or toward the center portion of the vessel. It is sometimes shortened to midships.

How it works

Amidships is the middle part of the vessel along her length. It is a place, so something can be forward of amidships or aft of it. The Boat Crew Seamanship Manual names the sides there as the starboard beam and the port beam. Do not confuse it with abeam, which is a direction at right angles to the centerline.

The word also names a helm position. With the rudder amidships the rudder lies fore and aft, in line with the keel. The manual uses it in its maneuvering steps, such as setting the rudder amidships before clearing a slip, and it notes that a vessel with the helm amidships and the rudder held steady usually keeps a straight track.

It also locates the pivot point. When a boat is at rest the pivot point is generally just forward of amidships. When it moves ahead or astern the effective pivot shifts, forward or aft, which is why the bow and stern swing differently when the rudder goes over.

What to know for the exam

  • Deck General questions on maneuvering use amidships for the rudder position, as in a twin-screw boat turning with the helm amidships, and ask where a boat's pivot point lies when it is at rest and how that point moves when the boat makes sternway.
  • Helm-command questions in the Able Seaman and Deck General modules test what each order does to the rudder, so know which orders put it amidships and which shift it to the other side.
  • In loading and construction material it names a location. The Army cargo handbook, for example, defines sagging as a ship loaded heavier amidships than forward.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Boat Crew Seamanship Manual, Chapter 8, Sec. A; Chapter 10, Sec. A and Sec. D
  • Army FM 55-17, Cargo Specialist's Handbook, Paras 7-3 to 7-5 (trim, hogging and sagging)Cargo Specialists' Handbook, FM 55-17

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.