Cleat
An anvil-shaped deck fitting for securing or belaying lines.
How it works
A cleat is the horned fitting you belay a line to, anvil-shaped with two horns. The Cutter Seamanship Manual calls it a twin-horned device for securing lines, and the Boat Crew manual adds that cleats are sized by length. The rule of thumb is 1/16 inch of line diameter for each inch of cleat, so a 3/8 inch line takes a 6 inch cleat and a 1/2 inch line an 8 inch one.
It has limits as a towing fitting. All deck hardware used for towing should have backup plates to spread the load, made of pressure treated hardwood or exterior grade plywood at least twice as thick as the largest bolt diameter, with bolts rather than screws and a flat washer and lock washer. On Auxiliary facilities, as a rule of thumb, no tow should be attempted with line smaller than 3/8 inch, so the smallest cleat on a facility should be 6 inches.
How the line is made up matters. The manual says not to secure a towline to a bitt or cleat with half hitches, because they cause jamming and fusing, and to use a round turn with figure eights instead. Wedge cleats are a yachting item used for sheets that need instant release, and they are not a mooring or towing fitting.
What to know for the exam
- A common calculation asks what size cleat suits a given line diameter using the 1/16 inch per inch rule. Work it backward too, from cleat length to the largest line it should take.
- Towing questions ask which method of securing a towline to a bitt or cleat the Coast Guard manual says not to use, and why.
- Related items cover bitts, bollards and chocks, so keep the four fittings separate.
Sizing a cleat
A mooring line is 5/8 inch in diameter. Five eighths is 10/16, so the cleat should be 10 inches long. Going the other way, a 6 inch cleat takes a line of 6/16, which is 3/8 inch.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- USCG Boat Crew Seamanship Manual, Chapter 7, Sec. E.2.a to E.2.c; Chapter 17, Sec. E
- USCG Cutter Seamanship Manual, Chapter 4, Sec. C.2.aCutter Seamanship Manual (USCG)
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.