Bilge
The lowest interior part of a ship. Water that collects there is called bilge water.
How it works
The bilge is where water goes, and it is also a part of the hull shape. FM 55-501 uses it twice: the bilge is the low part of the interior, and the strakes at the turn of the hull are called bilge strakes. Bilge pumps are used to remove the water that accumulates there. Machinery space bilges collect oily mixtures, which is why the rules treat bilge discharge as a pollution matter.
Oily bilge water cannot just be pumped over the side. 33 CFR 151.10 allows an offshore discharge from a ship other than an oil tanker only when all conditions are met: more than 12 nautical miles from the nearest land, not a special area, the ship proceeding en route, the oil content less than 15 ppm without dilution, and oily-water separating equipment or a bilge alarm in operation. Inside 12 miles the oil content must not exceed 15 ppm and the equipment needs an approved 15 ppm alarm.
Ships of 400 gross tons and above but under 10,000 must be fitted with approved 15 ppm oily-water separating equipment under 33 CFR 155.360 (excluding ships with ballast water in fuel tanks). On small passenger vessels, 46 CFR 182.510 sets bilge pipe sizes and a suction strainer with an open area at least three times the pipe area.
What to know for the exam
- QMED and Designated Duty Engineer questions cover oily-water separators, the 15 ppm limit, bilge pump faults and how accidental flooding of the engine room bilges through the bilge system is prevented.
- Deck and Subchapter T questions ask about bilge pipe sizes and pump arrangements, and the conditions for hot work in the bilges, where 29 CFR 1915.14 requires flammable vapors below the stated percentage of the lower explosive limit.
- Fire questions classify a diesel fire in the engine room bilge as a flammable-liquid fire, so the bilge ties to the fire classes.
Common questions
Sources
- Army FM 55-501, Marine Crewman's Handbook, GlossaryMarine Crewman's Handbook, FM 55-501
- 33 CFR Part 151, 151.10 (oil discharges)33 CFR 151.10 on eCFR
- 33 CFR Part 155, 155.360 (oily-water separating equipment)33 CFR 155.360 on eCFR
- 46 CFR Part 182, 182.510 (bilge systems)46 CFR 182.510 on eCFR
- 29 CFR Part 1915, 1915.14 (hot work)29 CFR 1915.14 on eCFR
More Engineering terms
Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.