Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Bowline

A knot that forms an eye that will not slip, loosen or jam, and is not hard to untie after it has been under strain.

How it works

The bowline is the standard knot for a temporary eye in the end of a line. The Boat Crew Seamanship Manual notes that it does not slip or jam easily and is not hard to untie after being under strain. It can also join two lines, though the manual says there are better knots for that job.

To tie it, make an overhand loop the size of the eye you want, pass the bitter end up through the loop, take it around the standing part and back down through the loop, then pull tight by holding the bitter end and the loop in one hand and pulling the standing part with the other. The manual lists it among the knots most commonly used in boat operations, which crewmembers should learn to tie well.

Every knot costs strength. In the manual's table, a bowline leaves about 63 percent of the line's breaking strength, a clove hitch about 60 percent, a square knot 54 percent, and an eye splice 90 to 95 percent. For that reason knots are to be treated as temporary and a splice or seizing used where something permanent is needed.

What to know for the exam

  • The Deck General and Able Seaman modules ask which knot makes a temporary eye that does not slip or jam, and which bend joins lines of unequal size.
  • The Able Seaman marlinespike demonstration (code AB02) lists the bowline among the four knots that must each be demonstrated, with the clove hitch, square knot and sheet bend, within the time limit.
  • A question on securing a heaving line to a towline asks which hitch the Coast Guard manual prefers, and the manual names the clove hitch, with the bowline as another way to attach it.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Boat Crew Seamanship Manual, Chapter 7, Sec. D.2 (breaking strength table) and Sec. D.5.a (bowline)
  • USCG NMC Deck and Engineering Guide for Administration of Merchant Marine Examinations, Page 37 (AB02 demonstration)Deck and Engineering Exam Guide (NMC)

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.