Fender
A device of canvas, wood, line, cork, rubber or plastic hung over the side to absorb the shock of contact between vessels or between a vessel and a pier.
How it works
A fender takes the knocks so the hull and the pier do not. The Army handbook describes it as a device of canvas, wood or rope used over the side to take the shock of contact between a vessel and a wharf or another vessel.
The Coast Guard manual puts the practical rules for boats. Mooring lines and fenders should be rigged well before the approach so everything is ready before the coxswain has to concentrate on maneuvering to the dock, and the boat should always have a spare mooring line and a moveable fender at the ready. Once alongside, fenders go at strategic points along the hull to prevent chafing against the dock or float.
Two ships nested alongside one another need fenders between them, and the Army handbook says to make sure all lines are properly set and adequate fenders are rigged. Fenders are for contact, not for holding position, so they never replace properly led mooring lines.
What to know for the exam
- Mooring and docking questions in the deck general modules ask what to rig before approaching a dock and where fenders go to prevent chafing.
- Line questions ask where chafing gear is normally used, which is on mooring lines, and set that apart from portable fenders, which protect the hull.
- The Boat Crew manual says small line is used for tying off fenders, so fender lines are ordinary small stuff rather than heavy rope.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- USCG Boat Crew Seamanship Manual, Ch. 10 (Mooring and docking), Sec. D.2
- Army FM 55-501, Marine Crewman's Handbook, Ch. 4 (Mooring) and GlossaryMarine Crewman's Handbook, FM 55-501
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.