Eye splice
The splice used to make a permanently fixed loop, an eye, at the end of a line.
How it works
An eye splice is how you make a permanent loop in the end of a line. The Army Marine Crewman's Handbook has you unlay the strands four to five turns, then tuck them into the standing part. It rates the finished splice at 90 to 95 percent of the line's strength, against about 60 percent for a bowline, so a permanent loop is spliced, not knotted.
Aboard, eyes go over bollards and bitts. When two eyes must share a bollard, the Army handbook says to lead the second up through the eye of the first and then over the bollard, which is called dipping the eye. That way either line can be cast off without disturbing the other.
A heaving line is a related job. The handbook says to make the heaving line fast near the splice, not at the end of the bight, where it may jam when the eye is dropped over the bollard. In wire rope the eye splice is held to a specific minimum standard before it may be used as cargo gear.
What to know for the exam
- Able seaman deck questions ask the minimum tucks and wire removal pattern for an eye splice in wire to be used as cargo gear, and the Marlinespike Seamanship practical demonstration is one of the able seaman tasks.
- Mooring questions use the dipping the eye technique and where to attach the heaving line to a line that has an eye splice.
- The handbook figures to remember are 90 to 95 percent strength for the eye splice against about 60 percent for a bowline.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- Army FM 55-501, Marine Crewman's Handbook, Ch. 4, para. 4-35 (Dipping the eye); Ch. 12, para. 12-61 (Eye splice)Marine Crewman's Handbook, FM 55-501
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.