Skip to content
Mariner IQ
Start Free
Seamanship and Deck

Clove hitch

A hitch often used to fasten a line to a spar, ring, stanchion or larger line or cable.

How it works

The clove hitch is the all-round hitch for putting a line on a ring, spar, stanchion or another line. The Boat Crew Seamanship Manual calls it the best all-around knot for securing a line to a ring or spar, and says it is the hitch preferred for securing a heaving line to a towline. Tied correctly it will not jam or loosen, and it is easy to untie.

It does work out if it is slack. The manual warns that a clove hitch not tied tight enough may work itself out, and that reinforcing it with a half hitch prevents it. To tie it, pass the bitter end around the object so that the first turn crosses the standing part, take it around again and pass it through itself, then pull taut.

Like every knot it takes strength away. In the manual's table a clove hitch loses about 40 percent of the line's breaking strength, leaving 60 percent, compared with 5 to 10 percent lost by an eye splice. Slip clove hitches may work best in very cold weather because they are easier to untie.

What to know for the exam

  • Seamanship questions ask which hitch the Coast Guard manual prefers for securing a heaving line to a towline. The manual names the clove hitch.
  • The Able Seaman marlinespike demonstration, code AB02, makes the clove hitch one of the four knots each candidate has to tie, together with the bowline, square knot and sheet bend.
  • Another question asks which practice keeps a knot from slipping out when synthetic line is bent to an object. The manual says synthetic line holds knots poorly and recommends leaving a longer tail on the bitter end than with natural fiber line.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Boat Crew Seamanship Manual, Chapter 7, Sec. D.2 (breaking strength) and Sec. D.5.e; Chapter 17, Sec. C.3
  • USCG NMC Deck and Engineering Guide for Administration of Merchant Marine Examinations, Page 37 (AB02 demonstration)Deck and Engineering Exam Guide (NMC)

More Seamanship and Deck terms

Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.