Scope
The length of anchor line or chain put out, or the number of fathoms of chain out to an anchor or mooring buoy. Scope is increased in strong winds for more holding power. In towing, it is the length of the towline.
How it works
Scope is a ratio: the length of anchor rode paid out against the vertical distance from the bow chocks to the bottom. That vertical distance is the depth of the water plus the height of the chock above the surface. The Boat Crew Seamanship Manual gives 5 to 1 to 7 to 1 for normal conditions and 10 to 1 for heavy weather.
A longer scope lowers the angle of pull on the anchor, which keeps it digging into the bottom. The manual wants the lower end of the rode at an angle of 8 degrees or less to the bottom. Shorten the scope and the holding power drops, so a vessel in a rising wind pays out more.
There are limits. In a crowded anchorage a long scope lets the vessel swing in a big circle, so the manual says to consider the other boats nearby. Bowditch advises veering five to seven times the depth, with the exact amount depending on the vessel and the weather expected, and says to take the maximum height of tide into account when working it out. Buoy moorings use much less: Bowditch gives a scope of chain of typically about 3 times the water depth.
The word has a second use in towing, where the scope of the towline is its length, and the towing watch adjusts it on the coxswain's order.
What to know for the exam
- Questions ask what happens to holding power when you shorten the scope, and which tidal condition must be considered in working out how much chain to veer.
- They also ask the ratios for normal and heavy weather, and give depth and chock height to find the rode needed.
- Scope appears under the anchoring topics of the Deck General modules and the OUPV exam, and one question asks about the typical scope of chain on a navigation buoy mooring.
Checking a scope
Depth is 15 feet and the bow chock is 3 feet above the water, so the vertical distance is 18 feet. With 90 feet of rode out, the scope is 90 / 18 = 5 to 1. To reach 10 to 1 for a forecast blow, you would pay out 180 feet in total.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- USCG Boat Crew Seamanship Manual, Chapter 10, Section H (H.2, H.13, H.15, H.17) and Chapter 1, C.20 (towing watch)
- Bowditch, American Practical Navigator (Pub. 9) Vol. 1, Sec. 802 (Buoy Moorings) and Sec. 1115 (Using the Fathometer, anchoring)Bowditch, Pub. 9 (NGA)
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.