Mooring
A chain or synthetic line that attaches a floating object to a stationary object such as a dock or a sinker.
How it works
The word covers two different things afloat. A mooring is the permanent ground tackle, chain or line from a floating object to a stationary one such as a sinker, and mooring is also the act of securing a vessel to a dock using lines. The glossary entry is the first meaning; on exam day you meet the second one just as often.
At a dock a small boat is normally held by four lines, according to the Boat Crew Seamanship Manual. The bow line and stern line keep the vessel secured to the dock, and the after bow spring and forward quarter spring keep it from surging forward or aft. In foul weather, breast lines can be added for extra holding strength, and fenders go at strategic points to keep the hull from chafing.
Spring lines also help maneuver. With only the forward quarter spring attached, backing down the engine moves the bow away from the dock, and the after bow spring is used to move the stern away. The manual says the stern of a boat should never be tied down while maneuvering beside a dock, except for using the forward quarter spring, because tying it down restricts maneuverability.
Wind decides the approach. With an off-dock wind, make the approach at a sharp angle, 45 degrees or more. With an on-dock wind, approach parallel to the berth with fenders rigged and no fore and aft movement when touching.
What to know for the exam
- Seamanship questions ask the approach angle when mooring with an off-dock wind. The manual's answer is a sharp angle of 45 degrees or more.
- Line material questions ask which mooring line material has the most elastic elongation, and nylon is the answer among common materials.
- Passage planning questions include mooring as the last element of a berth to berth plan, from undocking through departure, enroute, approach and mooring.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- USCG Boat Crew Seamanship Manual, Ch. 10, Boat Handling, Section D (Figure 10-19 Mooring Lines, D.2.d Using Spring Lines, D.3.h to D.3.l); Ch. 7, Table 7-1 Fiber Line Characteristics
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.