Stern
The extreme after end of a vessel.
How it works
The stern is the rear of a boat, and the Boat Crew Seamanship Manual builds a small vocabulary around it. Moving toward the stern is going aft, a boat that moves backward is going astern, and standing at the stern looking forward, the right rear section is the starboard quarter and the left rear section is the port quarter. Dead astern is 180 degrees on the relative scale, with the bow at zero.
Several rules turn on this end of the vessel. The sternlight is the white light placed as nearly as practicable at the stern. Draft is read from numbered scales painted on the side at the bow and stern, and the difference between the two is the trim.
In boat work the stern has its own jobs. Towing astern uses a towline, while alongside towing uses alongside lines, and hoists from standard boats are normally made from the stern. The manual also notes that in heavy weather the force needed to capsize a boat is most likely to come from seas directly astern.
What to know for the exam
- The word is rarely tested alone. It appears inside lights questions, such as which lights a vessel shows, the sternlight arc, and how a pushing or towing vessel's lights are arranged.
- The Boat Crew Seamanship Manual treats the stern as a danger area in two places: following seas, and the propellers when you escape from a capsized boat while the engines are still running.
- Know the compound terms (aft, astern, quarter) because deck and able seafarer questions use them without defining them.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- USCG Boat Crew Seamanship Manual, Chapter 8, Section A (A.2 to A.4) and Chapter 6, Section G (heavy seas)
- Army FM 55-501, Marine Crewman's Handbook, Chapter 3 (structural parts of the hull, drafts at bow and stern)Marine Crewman's Handbook, FM 55-501
More Seamanship and Deck terms
Parts of a vessel, deck fittings, lines, knots and anchoring and mooring words.