Skip to content
Mariner IQ
Start Free
Stability and Construction

Watertight integrity

The state of being closed down so that water cannot enter the vessel through openings.

How it works

The Boat Crew Seamanship Manual describes watertight integrity as a compartment or fitting designed to prevent the passage of water into it, and the manual says a boat may sustain heavy damage and remain afloat if it is maintained. Doors, hatches and scuttle covers must be securely dogged while underway and when moored and unattended. Scuttles stay secured except while open for inspection, cleaning or painting, and are never left open overnight.

Compartmentation is the point of it. With the doors and hatches closed, the space between bulkheads and decks is a watertight compartment, and without such compartments a hole anywhere in the hull will sink the boat. Dividing the hull into several compartments means one or more can flood without sinking her. Excessive compartmentation, though, interferes with engineering spaces and movement.

It links directly to stability. Downflooding is the entry of water into the hull, resulting in progressive flooding and loss of stability, and 46 CFR 170.055 defines the downflooding angle by the first opening that cannot be closed watertight. After damage, closures to a damaged compartment must not be opened until you know flooding did not occur, or that opening will not cause further flooding. Suspect flooding if air escapes when the dogs on a door are released.

What to know for the exam

  • Questions ask how the manual defines downflooding, how the downflooding angle is measured under 46 CFR 170.055, and what corrective actions apply to a hull holed with free communication with the sea.
  • The manual's rules for dogging doors and hatches and for entering a closed compartment after damage are the place to study closure handling.
  • The topic is in the damage control and hull integrity topics of the Deck General modules, vessel construction and watertight integrity in the master less than 100 GRT exam, and the stability material.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Boat Crew Seamanship Manual, Chapter 8, Section C (Watertight Integrity) and Chapter 8.B (B.24); Chapter 9, Section B (B.5)
  • 46 CFR Part 170, Sec. 170.055 (Definition of downflooding angle)46 CFR 170.055 on eCFR

More Stability and Construction terms

Stability, load line, watertight integrity and hull structure terms.