Skip to content
Mariner IQ
Start Free
Engineering

Volt

The unit of electromotive force or electrical pressure. One volt is the pressure needed to send 1 ampere of current through a resistance of 1 ohm.

How it works

Voltage is the difference of potential between two points, the electrical pressure that drives current. NEETS Module 1 states that one volt is the electromotive force when one coulomb of charge exists between two bodies, and that a conductor has a resistance of one ohm when a potential of one volt produces a current of one ampere. Units are the volt, kilovolt, millivolt and microvolt, so 1 kV is 1,000 V and 1 mV is 0.001 V.

The links between quantities are Ohm's law and the power formula. Current in a circuit is directly proportional to the applied voltage and inversely proportional to resistance. Power in watts is voltage times current, P = E x I, and with resistance in the circuit it can also be written as I squared times R.

On the meter, a voltmeter is always connected in parallel with the part of the circuit you want to measure, while an ammeter is always connected in series. On a vessel, an automatic voltage regulator on the generator switchboard holds the ac voltage constant through normal load changes, and paralleling a generator involves conditions on the incoming machine and the live bus bars.

What to know for the exam

  • Questions in the engineering modules use voltage in generator paralleling, automatic voltage regulators and switchboard metering.
  • Basic electrical questions apply Ohm's law and the power formula, and ask how a meter is connected.
  • Expect the term inside a larger question about a machine rather than as a pure definition.
WORKED EXAMPLE

Ohm's law and power

A 24 volt supply is applied to a 6 ohm resistance. Current is voltage divided by resistance: 24 / 6 = 4 amperes. Power is voltage times current: 24 x 4 = 96 watts. Doubling the voltage to 48 volts across the same resistance doubles the current to 8 amperes and quadruples the power to 384 watts.

Common questions

Sources

  • NEETS Module 1, Matter, Energy and Direct Current, Appendix I (Glossary)NEETS Module 1
  • NEETS Module 1, Matter, Energy and Direct Current, Chapter 1 (Electrical Resistance; Summary) and Chapter 3 (Ohm's law; Power)NEETS Module 1
  • NEETS Module 3, Circuit Protection, Control and Measurement, Chapter 1 (Ammeters connected in series; Voltmeters connected in parallel)NEETS Module 3

More Engineering terms

Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.