Damage control
The measures needed to preserve or restore a ship's watertight integrity, stability and maneuverability, control list and trim, and make rapid repairs. It includes assessing and responding to fire, flooding or collision damage.
How it works
Damage control covers keeping or restoring watertight integrity, stability and maneuverability, controlling list and trim, and making quick repairs after fire, flooding or collision. The Boat Crew Seamanship Manual says the primary job of Coast Guard SAR is to save lives, and that flooding control to save property alone should only be done after a complete risk assessment of the crew's exposure.
On a ship it starts with the structure. The Navy damage control text says that without compartmentation or watertight integrity a severely damaged ship faces almost certain doom if damage control teams are not trained or equipped. The Cutter Seamanship Manual explains the trade-off: more compartments make a ship harder to sink, but too many interfere with machinery arrangement and operation.
The order of work follows the water. For a pierced hull the Navy text names two measures, plugging the holes and establishing flooding boundaries, and says dewatering can be effective only after both. Isolating a damaged pipe starts with securing the cutout valves on each side. On a boat, small holes are plugged from inside if possible, large holes patched, and free surface and list are countered. A watertight door or hatch on a damaged boat must not be opened until it is known that flooding has not occurred or will not occur.
What to know for the exam
- The Damage Control and Hull Integrity questions in the Deck General modules ask what plugging and boundaries do before dewatering, how to counter a list toward the damaged side, and why a ship is not subdivided without limit.
- Engine department modules ask about flooding, dewatering, stability and trim, including counterflooding for a list caused by off-center ballast.
- Subchapter T questions ask about through-hull fractures and about bilge and subdivision requirements, which are damage control by design.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- NAVEDTRA 14057, Damage Controlman, Chapter 3 (Ship Compartmentation and Watertight Integrity); Chapter 8 (Patching Materials; Emergency Pipe Patching)
- USCG Cutter Seamanship Manual, Chapter 2, Sec. BCutter Seamanship Manual (USCG)
- USCG Boat Crew Seamanship Manual, Chapter 8, Sec. C; Chapter 9, Sec. B; Chapter 18, Sec. J
More Safety and Lifesaving terms
Lifesaving equipment, distress, man overboard and firefighting terms.