Free surface effect
The tendency of loose liquid in a tank to stay level as a ship heels. Free surface reduces GM and so reduces stability.
How it works
Loose liquid in a partly filled tank behaves badly when the ship heels. The Navy damage controlman text explains that the surface stays level while the ship tilts, so the liquid's weight shifts to the low side. That shift acts like a rise in the vessel's center of gravity, and the result is a reduction in GM.
46 CFR 170.285 states it the same way for regulators: the virtual increase in the vessel's vertical center of gravity due to liquids in tanks. The damage stability section, 170.290, lets the effect be found by assuming the vessel is heeled five degrees or by the moment of transference method. Stability calculations must include a free surface correction wherever loose liquid exists.
A tank that is completely full has no free surface, and its contents can be treated as a solid weight acting at the tank's location. The Navy text also notes that the effect is separate from the weight of the liquid added, and that pocketing, where the liquid meets the tank top or bottom as the ship heels, narrows the free surface and lessens the effect at larger angles of heel.
What to know for the exam
- Questions ask what a partially filled tank does to GM and to stability, and the answer is that it reduces them. The wrong options say it raises stability or has no effect.
- They ask how liquid in a completely full tank is treated for stability calculations, per the Navy damage controlman manual.
- Regulation questions in the deck general modules cite 46 CFR 170.290 for the heel angle assumed when finding the effect.
- The DDE engineering modules cover the same effect under flooding, dewatering, stability, trim and damage control, and ask what a partially filled tank does to stability.
Common questions
Sources
- NAVEDTRA 14057, Damage Controlman, Chapter 12, Effects of Loose Water
- NAVEDTRA 14057, Damage Controlman, Ch. 12 (Effects of loose water, free surface correction)
- 46 CFR Part 170, Sec. 170.285 and Sec. 170.290 (Free surface correction)46 CFR Part 170 on eCFR
More Stability and Construction terms
Stability, load line, watertight integrity and hull structure terms.