Skip to content
Mariner IQ
Start Free
Stability and Construction

Downflooding

Entry of seawater through any opening into the hull or superstructure of an undamaged vessel because of heel, trim or submergence.

How it works

Downflooding is how a stable-looking vessel gets into trouble: seawater enters through an opening because she heeled, trimmed or settled far enough to put it under. 46 CFR 170.055 defines the term for an undamaged vessel, so the water comes in through an opening in the hull or superstructure, not through a hole torn by damage.

The same section defines the downflooding angle, the static angle from the intersection of the vessel's centerline and waterline in calm water to the first opening that cannot be closed watertight and through which downflooding can occur. An opening that can be closed watertight does not set the angle, while an open vent or a door that cannot be sealed can. Some stability subparts define the angle differently, and 170.055 lists them as exceptions, so read the section that applies.

The angle matters because stability criteria stop counting the righting arm curve there. A rule such as 46 CFR 174.015 for a barge in ocean service measures the area under the curve only up to the smallest of the angle of maximum righting arm, the downflooding angle or 40 degrees. Stability booklets show downflooding angles on the general arrangement plans for this reason.

What to know for the exam

  • Questions test the Boat Crew Seamanship Manual definition and the 46 CFR 170.055 definition separately. The CFR wording that matters is the first opening that cannot be closed watertight.
  • Expect to be asked which opening the angle is measured to, and how the angle caps the stability criteria in rules such as 46 CFR 174.015 and, for towing vessels, 46 CFR 173.095.
  • The term lives in the vessel construction, trim and stability topic of the deck general modules and in the passenger vessel stability and watertight integrity topics.

Common questions

Sources

More Stability and Construction terms

Stability, load line, watertight integrity and hull structure terms.