Skip to content
Mariner IQ
Start Free
Engineering

Economizer

The part of a boiler's heating surface where feed water is heated before it enters the steam drum.

How it works

An economizer recovers heat that would otherwise go up the stack. In the Navy Fireman text it is a bank of finned tubes installed in the uptake space from the furnace, so the rising combustion gases pass around the tubes while feedwater runs inside them.

All of the feedwater flows through the economizer tubes before it enters the steam drum, and the same text says it leaves roughly 100 degrees Fahrenheit hotter. The metal projections on the outside of the tubes, called fins, studs, rings or gill rings, increase the heating surface.

Keep it apart from the other tube banks. The generating tubes make steam, the superheater dries and heats the steam, and the economizer works on feedwater only, upstream of the drum.

What to know for the exam

  • Boiler questions in the QMED fireman-watertender, oiler and machinist modules ask what the economizer does, where it sits in the feedwater path and how it differs from the superheater.
  • Lighting-off questions ask about valve line-up, including which economizer, superheater and drum valves are open or closed before firing a boiler.
  • One air conditioning question uses economizer as a component name in a two-stage centrifugal refrigeration system, so check which plant the question describes.

Common questions

Sources

More Engineering terms

Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.