Cavitation
A localized gaseous condition in a liquid stream where pressure falls to the vapor pressure. Around a propeller it is the formation of a partial vacuum at the blades.
How it works
Cavitation is bubbles forming in water where the pressure has dropped to the vapor pressure. Around a propeller it happens when blade-tip speed is too high for the size and shape of the wheel. FM 55-501 describes the result as a rise in revolutions without a matching rise in thrust, a loss of efficiency, and when fully developed a limit on speed no matter how much engine power is available.
The Boat Crew Seamanship Manual lists the usual triggers: high shaft speed, trying to spin a stopped propeller at maximum speed, going rapidly from ahead to astern, and running in aerated water. It occurs more readily when backing, because the suction screw current pulls air from the waterline and, on outboards, exhaust gas bubbles into the propeller. Outboards and stern drives carry an anti-cavitation plate above the propeller.
The cure is to ease off. The manual says the easiest way to regain thrust is to reduce propeller revolutions and, as the bubbles subside, increase them gradually. Cavitation also does damage: in the engine room it erodes surfaces in contact with coolant, and the Navy text names pump cavitation as a result of foaming hydraulic fluid.
What to know for the exam
- Deck questions ask what to do when a propeller cavitates and thrust is lost, and what happens to a propeller that runs through heavily aerated white water in a surf zone.
- Engineering questions ask which component of a closed, recirculating diesel cooling system has coolant-side surfaces most susceptible to cavitation corrosion and erosion.
- Pump and hydraulic questions link cavitation to air in the fluid and foaming. The Navy fluid power glossary defines it as a localized gaseous condition in a liquid stream where pressure falls to the vapor pressure.
Common questions
Sources
- NAVEDTRA 14105, Fluid Power, Appendix I (Glossary); also USCG Boat Crew Seamanship Manual, Appendix AFluid Power, NAVEDTRA 14105
- Army FM 55-501, Marine Crewman's Handbook, Chapter 4, Forces Affecting Boat Handling (propeller pitch cavitation)Marine Crewman's Handbook, FM 55-501
- USCG Boat Crew Seamanship Manual, Chapter 10, Sec. A.11.c and A.17
- NAVEDTRA 14105, Fluid Power, Chapter 3 (foaming tendencies)Fluid Power, NAVEDTRA 14105
More Engineering terms
Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.