Eductor
A siphon device with no moving parts that moves water from one place to another by forcing the pumped liquid into a rapidly flowing stream (the venturi effect). It is used as dewatering equipment to remove firefighting and flooding water.
How it works
An eductor is a jet pump with no moving parts. A high-velocity jet of seawater passes through a converging nozzle, which lowers the pressure in the chamber around it. Atmospheric pressure then pushes the surrounding water in to mix with the jet, and a diverging nozzle slows the mixture and recovers pressure so it can be discharged.
Engine rooms use eductors for dewatering and as part of the main and secondary drainage system. The Navy Fireman text describes a typical eductor system whose discharge piping is below the waterline, with a swing-check valve above the overboard discharge valve that stops water backing up into the system if system pressure drops below the outside water pressure. Posted step-by-step procedures at eductor stations exist because getting the line-up wrong can flood the space.
The Boat Crew Seamanship Manual lists the eductor as dewatering equipment for removing firefighting and flooding water. It needs a motive supply, so it is only as good as the pump feeding it, and it is not a positive-displacement pump.
What to know for the exam
- The QMED pumpman and machinist modules and the engineering safety and flooding modules ask how an eductor works, what the venturi effect does and why the swing-check valve sits above an overboard discharge.
- Pump-type questions can list an eductor beside centrifugal and positive-displacement pumps. Know that it is the one with no moving parts.
- Deck modules can ask what an eductor is used for, since the Boat Crew Seamanship Manual lists it as dewatering equipment.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- NAVEDTRA 14104, Fireman, Ch. 9 (Pumps), Fig. 9-13 and 9-14 (Eductor and eductor system)Fireman, NAVEDTRA 14104
More Engineering terms
Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.