Skip to content
Mariner IQ
Start Free
Engineering

Vacuum

A space where the pressure is less than atmospheric. It is expressed as the difference between the absolute pressure in the space and atmospheric pressure, commonly in inches of mercury.

How it works

Vacuum is measured against the atmosphere. NAVEDTRA 14104 says it is expressed as the difference between the absolute pressure in the space and the pressure of the atmosphere, most commonly in inches of mercury, on a gauge scale marked 0 to 30 in. Hg. A reading of zero means the pressure is the same as atmospheric, so there is no vacuum, and a reading of 29.92 in. Hg is a perfect or nearly perfect vacuum. A reading between 0 and 29.92 is a partial vacuum.

Absolute pressure is atmospheric pressure plus gauge pressure, and atmospheric pressure is 14.7 psia at sea level. For a vacuum, the absolute pressure is the atmospheric pressure minus the vacuum reading. In practice a perfect vacuum cannot be obtained even in a laboratory.

On a steam plant, vacuum matters at the condenser. The throttle watch checks the gauges showing the vacuum obtained in the main engine low-pressure turbine. Evaporator watches also check vacuum along with pressure, temperature and the salt content of the distilled water. Crankcase vacuum is another item in engine trend analysis.

What to know for the exam

  • Questions ask which reading on a vacuum gauge marked in inches of mercury indicates a perfect or nearly perfect vacuum, so remember the scale runs 0 to about 29.92.
  • Others ask about condenser and evaporator vacuum in steam plants, crankcase vacuum in diesel engine trend analysis, and vacuum in the intake between the air filter and the turbocharger.
  • The topic is part of the steam, diesel and gas turbine plant questions of the engineering modules.
WORKED EXAMPLE

From vacuum reading to absolute pressure

A condenser vacuum gauge reads 27 inches of mercury when the barometer is at 29.92. The absolute pressure in the condenser is 29.92 - 27 = 2.92 inches of mercury absolute. A perfect vacuum would read 29.92 on the gauge, and the absolute pressure would be zero.

Common questions

Sources

  • NAVEDTRA 14104, Fireman, Chapter 2, Pressure DefinitionsFireman, NAVEDTRA 14104
  • NAVEDTRA 14104, Fireman, Chapter 2 (Pressure Definitions); Chapter 3 (atmospheric pressure, 14.7 psia); Chapter 1 (Throttle Watch, Evaporator Watch)Fireman, NAVEDTRA 14104

More Engineering terms

Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.