Skip to content
Mariner IQ
Start Free
Stability and Construction

List

A steady lean of a ship to port or starboard caused by an unbalance of weight.

How it works

List is a permanent lean, usually caused by weight that is out of balance. Heel is the temporary version, caused by wind, waves, turning or a weight that moves. The Boat Crew Seamanship Manual draws the line exactly this way: heeling moments cause a vessel to list (permanent) or heel (temporary).

Typical causes are a tank filled on one side, cargo stowed unevenly, or water taken into one compartment after damage. When assisting a damaged vessel, the Boat Crew manual warns that any change in stability may result in the loss of the vessel, and added weight from the assisting crew is part of that.

The cure for a list is to correct the athwartships weight distribution, by moving weight toward the high side, removing weight from the low side, or ballasting a tank on the high side. Cargo handling references say list during loading or discharge usually comes from unequal distribution of liquids or cargo. List is a side-to-side problem; trim is the fore and aft equivalent.

What to know for the exam

  • Questions use heel and list together for a sideways inclination about the fore and aft axis, and they ask how to correct it. The answer centers on moving weight athwartships, for example using wing tanks near the longitudinal center so that trim is not changed.
  • Expect distractors that confuse list with trim or with sinkage; trim is a fore and aft difference in draft.
  • Free surface effect and loose water are tested in the same stability topics, so know that they are separate from list.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • USCG Boat Crew Seamanship Manual, Ch. 1, Stability (heeling moments cause a vessel to list or heel)
  • NAVEDTRA 14057, Damage Controlman, Ch. 12, Principles of Physics (stability review questions on list and trim)

More Stability and Construction terms

Stability, load line, watertight integrity and hull structure terms.