Skip to content
Mariner IQ
Start Free
Navigation and Charts

Line of position

Also called LOP

A line on which a ship may be presumed to be located as a result of observation or measurement. Ranges, bearings and distance arcs are the three general types, and two or more lines that cross give a fix.

How it works

A single observation tells you only that you are somewhere along a line, not where on it. A visual bearing to a charted lighthouse puts you on the reciprocal bearing line from that light; a range puts you on the line through two charted objects; a distance arc from radar puts you on a circle. Each of these is a line of position, usually written LOP.

You plot a bearing LOP from the landmark outward along the reciprocal of the observed bearing. If a lighthouse bears 300 degrees, the ship is on the 120 degree line from the lighthouse. FM 55-501 prefers true bearings, so a relative bearing is first converted to true by adding the ship's true heading. Each LOP is labeled with the time in four digits above the line, and a bearing LOP also carries the bearing in three digits below it.

One LOP is not a position. Two or more crossing lines in the same area give a fix, and the best fixes come from lines that cross at a wide angle. If you take bearings at different times, you need a running fix, which advances the earlier line by the distance run.

What to know for the exam

  • Questions use the term inside piloting problems: crossed lines of position give a fix, while a single line of position does not.
  • Running fix questions turn on how the first line of position is advanced by the assumed distance run, and what error results if the distance run is wrong.
  • Know the three general types named by the handbook: ranges, bearings (including tangents) and distance arcs.

Common questions

Sources

More Navigation and Charts terms

Position, direction, compass error and chart terms used in chart work and piloting.