Propeller
Also called screw
A hub with radiating blades set in a helical pattern. Turned in the water, it creates a discharge that drives the boat. Mariners also call it the screw.
How it works
A propeller works by drawing water in from all around the blades and throwing it astern in a powerful stream. FM 55-501 calls that stream the screw current: the water going in is the suction current, and the water thrown out is the discharge current. The rudder sits directly behind the propeller so that the discharge current can turn the boat, and moving the rudder right deflects the discharge to the right and forces the stern left.
Pitch and slip describe how it performs. Pitch is the distance the propeller would advance in one revolution if the water were solid. Slip is the difference between the speed of the ship and the speed of the propeller, the percentage of distance lost because water yields to the thrust. Cavitation appears when blade tip speed is too high for the propeller's size and shape: bubbles form, engine revolutions climb without equivalent thrust, and a fully developed case limits speed regardless of the power available.
Single-screw boats do not run straight in every maneuver. The Navy seaman text says single-screw boats have right-handed screws turning clockwise going ahead, which walks the stern to starboard as the boat gathers headway, so they turn faster to port than to starboard. Backing throws the stern to port because the discharge current strikes the hull high on the starboard side. Twin-screw vessels usually have outturning propellers, the starboard one right-handed and the port one left-handed, which balances the sidewise pressure.
What to know for the exam
- Boat handling questions ask why speed should be slower when making a starboard-side-to landing with a single-screw right-handed boat. The answer is to avoid having to back down fast, which swings the stern to port.
- A twin-screw question has the coxswain clutching one engine ahead and the other astern at equal RPM, and asks for the resulting tactical diameter from the Boat Crew manual.
- Engineering and ship design questions use propeller terms such as speed of advance and wake fraction. Wake fraction is a ratio, while speed of advance is a speed.
Slip for a 24 inch pitch propeller
A propeller of 24 inch pitch turning 1,000 rpm would advance 24,000 inches a minute if the water were solid, which is 2,000 feet a minute, or 120,000 feet an hour. Dividing by 6,076 feet per nautical mile gives about 19.7 knots. If the boat actually makes 15 knots, slip is (19.7 - 15) / 19.7, about 24 percent.
Common questions
Sources
- USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
- Army FM 55-501, Marine Crewman's Handbook, Ch. 4, Propeller Action (paras. 4-4 to 4-8); Handling Single- and Twin-Screw Vessels (paras. 4-14 to 4-26)Marine Crewman's Handbook, FM 55-501
- NAVEDTRA 14067, Seaman, Boat handling: right-handed screws on single-screw boats
More Engineering terms
Pumps, pressure, boilers, electrical basics and propulsion terms for engine department exams.