Skip to content
Mariner IQ
Start Free
Stability and Construction

Stability

The ability of a vessel to return to an upright position after being heeled over. Both internal forces (design and loading) and external forces (wind and sea) affect it.

How it works

The Boat Crew Seamanship Manual splits stability into two kinds. Longitudinal, fore and aft, stability keeps the boat from pitching end over end, and transverse stability keeps it from rolling over. A boat is longer than wide, so its longitudinal stability is much greater than its transverse stability.

Weight placement controls the transverse side. Adding weight above the center of gravity, or removing weight from below it, reduces stability, and a high enough center of gravity makes the boat unstable. Wind, waves, rudder-induced turning forces, shifting weights, added or removed weights and loss of buoyancy all heel a vessel; a stable boat does not capsize under normal heeling moments because of its righting moment.

Three problems are worth knowing by name. Free surface effect arises from partly filled tanks or compartments, where the liquid shifts and the vessel does not want to right itself; the manual notes that doubling the width of the free surface changes its adverse effect by a factor of four. Ice building up on the topsides is another source of lost stability; the manual's corrective actions include changing course or speed to reduce freezing spray and rolling, and removing the ice. Downflooding lets water into the hull, causing progressive flooding and loss of stability, so keeping hatches and openings closed matters.

What to know for the exam

  • Questions ask what counts as a static force, how topside icing changes stability, what to do about free communication with the sea, and how the manual defines downflooding.
  • Regulatory ones ask who must approve a vessel's trim and stability booklet, and what 46 CFR 170, 173 and 174 require, such as the stability test condition for a tank vessel.
  • The topic is part of the stability and construction topics of the Deck General modules and the Deck General for towing vessels, and also appears in the engineering and tankerman material.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Chapter 9, Introduction
  • USCG Boat Crew Seamanship Manual, Chapter 9, Stability, Sections A and B (types of stability, free surface effect, icing, downflooding)
  • 46 CFR Part 170, Sec. 170.055 (Definitions, downflooding angle)46 CFR 170.055 on eCFR

More Stability and Construction terms

Stability, load line, watertight integrity and hull structure terms.