Running fix
A position found with only one aid available. You plot a bearing to it, plot a second bearing later, and advance the first line of position for the run between the two.
How it works
A running fix is what you use when you can get bearings to only one aid, or when the second aid is not yet visible. You plot a bearing to the aid, then a second bearing at a later time, either to the same object or to a different one, and you advance the first line of position to the time of the second. The running fix is where the second line crosses the advanced first line.
Advancing a line means moving it parallel to itself by the distance the vessel has run in the direction of her motion. Bowditch notes that you must account for course changes, speed changes and set and drift between the two bearings. It gives three ways to do it, including shifting the line by the vector from the DR position to the DR position corrected for set and drift, and moving the charted position of the aid instead of the line.
A running fix is less reliable than a fix from simultaneous lines because it depends on your estimates of course, speed and current. For that reason the plot should be treated with more caution than a fix from two or three lines taken at the same moment.
What to know for the exam
- Questions ask how the first line of position is advanced for the run, and what is true of the fix when your actual speed differs from the speed you used.
- Others ask how you can detect an oblique current from running fixes on one charted object, or what to assume about current to keep a margin of safety.
- Chart plotting problems in the Navigation Problems modules rely on these skills, and the topic is named piloting, bearings and chart plotting.
Advancing a line of position
At 1000 a vessel on course 090 at 12 knots plots a bearing to a lighthouse. At 1020 she plots a second bearing. In 20 minutes she has run 12 x 20/60 = 4.0 nautical miles. Slide the 1000 line 4.0 nautical miles toward 090, parallel to its original direction, and mark where it crosses the 1020 line. That crossing is the 1020 running fix.
Common questions
Sources
- Bowditch, The American Practical Navigator (Pub. 9), Vol. 1, Sec. 1112 (The Running Fix)Bowditch, Pub. 9 (NGA)
- Bowditch, American Practical Navigator (Pub. 9) Vol. 1, Sec. 1112 (The Running Fix)Bowditch, Pub. 9 (NGA)
More Navigation and Charts terms
Position, direction, compass error and chart terms used in chart work and piloting.