Skip to content
Mariner IQ
Start Free
Navigation and Charts

Chart datum

The level to which soundings on a chart are referred, usually a low-water level. Since 1980 it has been mean lower low water on all U.S. marine waters.

How it works

Every sounding on the chart is a depth below a reference level, and that level is the chart datum. NOAA's glossary says it is usually a low-water level, and since 1980 it has been mean lower low water on all U.S. marine waters, The Tide Tables use the same reference, relative to MLLW, for tide predictions and for soundings on NOAA charts.

To find the real depth, add the predicted tide height to the charted depth. When the tide table shows a height above MLLW, the water is deeper than charted by that amount. When it shows a negative height, the water is shallower than charted. A good plan allows a safety margin on top of draft.

Heights above the water use a different reference. Coast Pilot 2 says vertical clearances of bridges and overhead cables are in feet above mean high water unless otherwise stated, and the Great Lakes Coast Pilot 6 uses low water datum. A high tide therefore helps a deep-draft vessel and hurts one passing under a bridge.

What to know for the exam

  • Tide questions give a charted depth, a vessel's draft and a safety margin, then ask the earliest or latest time she can pass, using heights from a tide table.
  • Chart-reading questions ask which datum soundings are referred to and which datum bridge clearances use according to the Coast Pilot.
  • Another family uses tidal datums such as mean tide level and mean range, where NOAA formulas convert between them.
WORKED EXAMPLE

Clearance over a bar

A bar has a charted depth of 15 feet at MLLW. A vessel draws 13 feet and wants a 3 foot margin, so she needs 13 + 3 = 16 feet. That requires a tide at least 16 - 15 = 1.0 foot above MLLW. If the tide table predicts +2.4 feet, the actual depth is 15 + 2.4 = 17.4 feet, which leaves 17.4 - 13 = 4.4 feet under the keel.

Common questions

Sources

More Navigation and Charts terms

Position, direction, compass error and chart terms used in chart work and piloting.