Skip to content
Mariner IQ
Start Free
Safety and Lifesaving

Class A fire

A fire in common combustible materials such as wood, cloth, paper, rubber and certain plastics.

How it works

Class A is the fire you can see burning: wood, cloth, paper, rubber and some plastics. Water is the primary agent, because the job is to take heat away. The Boat Crew Seamanship Manual lists water and PKP dry chemical as the primary agents, with the main effect removing heat. FM 55-501 adds that foam and dry chemical may also be used and act mainly as smothering agents.

A Class A fire can burn deep, so reach matters. The manual says a solid stream of water is aimed at the base of the flames to break up burning material and penetrate to the seat of the fire. A portable extinguisher attack should be backed up with a hose line, and where the fire sits against a steel bulkhead, combustibles on the far side need attention too.

Extinguishers carry the letter. A rating such as 2A or 4A is an NFPA efficiency rating, and a 4A will put out twice as much Class A fire as a 2A. The Coast Guard also rates size with Roman numerals, I smallest to V largest.

What to know for the exam

  • Fire questions give a fuel, such as wood or cloth, and ask for the class, or give a class and ask for the best agent.
  • Engineering questions ask how effective Purple-K-Powder is on an ordinary Class A fire and what to do about hidden combustibles when fighting a Class A fire against a steel bulkhead.
  • Extinguisher rating questions apply the A letter, the NFPA numeral and the Coast Guard size numeral.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Chapter 18, Sec. C.2.a
  • USCG Boat Crew Seamanship Manual, Chapter 18, Sec. C.2 and Sec. D.1, D.3
  • Army FM 55-501, Marine Crewman's Handbook, Chapter 11, Classes of Fire; Extinguishing Agents; Portable Fire Extinguishers (11-79 to 11-82)Marine Crewman's Handbook, FM 55-501

More Safety and Lifesaving terms

Lifesaving equipment, distress, man overboard and firefighting terms.