Skip to content
Mariner IQ
Start Free
Navigation and Charts

Rhumb line

A line that makes the same angle with every meridian. It is a constant-course path, and on a Mercator chart it plots as a straight line.

How it works

Bowditch describes the rhumb line as the track of constant true direction. A ship that follows one between two places never changes her true course, and on a Mercator chart it plots as a straight line, which is why most course lines and visual bearing lines are drawn that way. A rhumb line that is not a meridian or a parallel spirals toward the pole and is called a loxodrome.

The straight line is not the shortest line. A great circle between the same two points crosses each meridian at a higher latitude than the rhumb line does, where the meridians are closer together, so it is shorter. Bowditch says the saving grows as latitude rises, as the route runs more nearly east and west, and as the difference of longitude increases. A track due north or south, or along the equator, is both a great circle and a rhumb line.

Rhumb line sailings are worked by methods such as parallel, plane and middle latitude sailing. Middle latitude sailing combines plane and parallel sailing and uses the mean latitude to turn departure into difference of longitude. Bowditch also notes that long radio bearings, which follow great circles, need conversion before they are plotted as rhumb lines.

What to know for the exam

  • Questions ask which sailing converts departure to difference of longitude using the mean latitude, and why a great circle is shorter even though the rhumb line looks more direct on a Mercator chart.
  • Others ask for the principal advantage of a rhumb line, and compare the great circle saving on two east-west passages at different latitudes.
  • The material belongs to the great circle and Mercator sailing topics in the oceans navigation modules, and appears in the navigation general modules too.
WORKED EXAMPLE

Departure along a parallel

A vessel sails due east along latitude 40 degrees N and changes longitude by 5 degrees, which is 300 minutes of arc. The departure is the difference of longitude times the cosine of the latitude: 300 x cos 40 degrees = 229.8 nautical miles. The same 300 minutes of longitude would be 300 nautical miles on the equator.

Common questions

Sources

  • Bowditch, The American Practical Navigator (Pub. 9), Vol. 1, Sec. 106 (Distance on the Earth) and Chapter 5Bowditch, Pub. 9 (NGA)
  • Bowditch, American Practical Navigator (Pub. 9) Vol. 2, Chapter 9, Secs. 902 (Rhumb Lines), 904 (Composite Sailing), 909 (Middle-Latitude Sailing)Bowditch, Pub. 9 (NGA)
  • Bowditch, American Practical Navigator (Pub. 9) Vol. 1, Sec. 1303 (Traverse Sailing, p = DLo cos L), Chapter 3 (Navigational Errors, radio bearings) and Chapter 5 (Nautical Charts)Bowditch, Pub. 9 (NGA)

More Navigation and Charts terms

Position, direction, compass error and chart terms used in chart work and piloting.