Skip to content
Mariner IQ
Start Free
Tides and Weather

Mean lower low water

Also called MLLW

A tidal datum: the average of the lower of the two low water heights of each tidal day over the National Tidal Datum Epoch. It is the chart datum for U.S. marine waters.

How it works

A tidal datum is a reference level cut from tide observations, and MLLW is the one the United States uses for chart soundings. Each tidal day has a lower low water, and MLLW is the average of those. The average comes from observations over the National Tidal Datum Epoch, a specific 19-year period NOAA uses so that datums across the country share a common basis.

MLLW is the sounding datum on most NOAA charts of the United States and Puerto Rico, which are the charts you use for the U.S. coasts. NOAA's Coast Pilot says it is used on all NOAA charts except those of the Great Lakes and a few other areas, where a different low water datum applies. Check the chart title or note for the datum before you rely on a depth.

Because it is an average, the water is sometimes lower. Bowditch points out that with MLLW as chart datum, the depth at lower low water will be less than the charted depth about as often as it is greater. The tide tables give height of tide above or below the datum, and a minus sign means a lower depth than charted.

What to know for the exam

  • Datum questions ask which reference plane soundings use on a given chart. NOAA charts of U.S. marine waters use MLLW, including a Pacific Coast chart, while the Great Lakes use their own Low Water Datum.
  • Questions about the datum ask how often the depth at lower low water falls below the charted depth, and the answer is about as often as it exceeds it.
  • Tide height calculations expect you to add the predicted height of tide, which may be negative, to the charted depth to get the actual depth, then compare to the vessel's draft.
WORKED EXAMPLE

Under-keel clearance from the tide table

The chart shows 12 feet at a shoal, and the tide table predicts a height of tide of -1.5 feet at the time you cross. Actual depth is 12 + (-1.5) = 10.5 feet. A vessel drawing 9 feet has 1.5 feet under the keel at that moment.

Common questions

Sources

More Tides and Weather terms

Tide, current, sea state and marine forecast terms.