Skip to content
Mariner IQ
Start Free
Aids to Navigation

Safe water mark

Also called fairway buoy, mid-channel buoy

A mark that shows unobstructed water on all sides, used for fairways, mid-channels and offshore approach points. It is red and white vertically striped, and if lighted shows a white light flashing Morse code A (short-long).

How it works

A safe water mark tells you the water is navigable all around it. It is used to mark fairways and mid-channels, and also the seaward end of a channel. Buoys are red and white vertical stripes, spherical or fitted with a red spherical topmark, and a beacon of this type has an octagonal daymark.

It differs from a lateral mark in that you may pass on either side. It has no port or starboard hand. That separates it from a preferred channel mark, which shows a channel junction and has horizontal red and green bands.

If lighted, the light is white. The Light List gives the rhythm as Morse code A, a short flash followed by a long flash. Some other uses exist, such as marking the centerline of a channel through a fixed bridge with an occulting white light, so check the Light List entry for a specific aid.

What to know for the exam

  • Questions ask what light a lighted safe water buoy shows in the US system, and which white light a lighted IALA safe water mark may show.
  • They also ask about the topmark of an IALA safe water mark.
  • The topic is part of the buoyage and light characteristics topics of the navigation general modules and the able seafarer navigation module.

Common questions

Sources

  • USCG Boat Crew Seamanship Manual, Appendix A (Glossary)
  • 33 CFR Part 62, United States Aids to Navigation System, Sec. 62.27 (Safe water marks) and Sec. 62.25 (Lateral marks)33 CFR Part 62 on eCFR
  • USCG Light List, Introduction, Light characteristics, p. xxi; bridge marking, p. xiiLight List (USCG)

More Aids to Navigation terms

Buoys, beacons, lights and the Light List terms for reading them.