Designated Duty Engineer
Also called DDE
A qualified engineer who may be the only engineer on a vessel with a periodically unmanned engine room.
How it works
A designated duty engineer, or DDE, is the engineering officer a company can carry as its only engineer when the engine room is built to run without someone in it at all times. The definitions in 46 CFR 10.107 tie the title to a periodically unmanned engine room, meaning a space with the main propulsion machinery and all sources of main electrical supply that is not manned at all times under all operating conditions, including maneuvering.
In a manned engine room the same operational-level officer is called an Officer in Charge of an Engineering Watch, or OICEW. The DDE title is the unmanned-room counterpart, and Part 10 describes both as engineering officers qualified at the operational level.
The endorsement is also graded by power. Part 11 lists a DDE category for vessels under 1,000 HP (750 kW) and another for vessels under 4,000 HP (3,000 kW), and 46 CFR 11.329 covers the STCW operational-level endorsement for machinery of 750 kW (1,000 HP) or more. A DDE endorsement with no horsepower limit is a separate, higher credential.
What to know for the exam
- The engineering modules are split by the size of plant the DDE endorsement covers: one set is labeled DDE Unlimited HP and another DDE 1000/4000 HP. Both include motor plants, gas turbine plants, engineering safety and environmental protection, and general subjects; only the unlimited set adds an electrical, electronic and control engineering module.
- Many engine questions open with a scenario that casts you as the designated duty engineer on a harbor tug, then ask a plain engineering question, such as which scavenging pattern an illustrated two-stroke engine uses. The title sets the scene; the question tests the machinery.
- Regulation questions send you to 46 CFR Part 15 to say what a DDE endorsement with no horsepower limitation may be used as. Read the manning rule itself, because the answer turns on its exact wording.
Which horsepower figure counts
A tug has two main engines rated 800 HP each. Under the 46 CFR 10.107 definition, horsepower is the total maximum continuous shaft horsepower of the entire main propulsion machinery as set by the manufacturer, so the vessel is a 1,600 HP vessel, not an 800 HP one. That is above the 1,000 HP (750 kW) limit and below 4,000 HP (3,000 kW), so the lower DDE category would not cover her. Check the current endorsement rules before relying on any limit.
Common questions
Sources
- 46 CFR 10.107, Definitions46 CFR 10.107 on eCFR
- 46 CFR Part 11, Sec. 11.201 (endorsement categories and age) and Sec. 11.329 (OICEW or DDE, operational level)46 CFR Part 11 on eCFR
More Regulations and Credentials terms
Credential, endorsement, route, tonnage and towing terms from 46 CFR.